Electrically Conductive Silver Filled Epoxy Thermally Conductive Silver Adhesive 1 Part Heat Cure

Electrically Conductive Silver Filled Epoxy Thermally Conductive Silver Adhesive  1 Part Heat Cure
  • Views: 54898
  • Brand: ConductiveX
  • Product Code: Electro-Bond 80
  • Availability: In Stock
  • $0.00

Available Options

Electro-Bond 80 is one part Electrically Conductive Adhesives, used in a variety of applications where electrical connectivity is needed, providing a conductive path where traditional methods such as solder, are not practical. Electrically Conductive Adhesives are ideal for attaching temperature sensitive components, or providing electrical interconnections on non-solderable substrates, such as plastic and glass.


Typical Properties

Components 1
Working Life @ 25°C 6 months
Hardness, Shore D 78
Particle Size 44
Shelf Life 6 months
Cure Type Heat Cure
Cure Schedule 1 hour @ 125°C / 15 minutes@ 150°C / 4 minutes @ 175°C
Benefits
Formulated for electronics applications, for the assembly line manufacturing, for high RF shieldings.
Typical Applications
EMI & RFI shielding, in the assembly or repair of printed circuit boards, waveguides, electronic modules, flat cable, high frequency shields, connections, circuitry.

Physical Properties

Appearance Silver
Filler Silver
Viscosity Paste
Substrates aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, circuit board
Density @ 25°C
Compressive Strength, PSI 8,500
Specific Gravity @ 25°C 2.33
Hardness 78
Lap Shear Strength 840
Reactive Solids Content, % 100
Tensile Strength, PSI 3700

Electrical Properties

Volume Resistivity <0.0005 ohm. cm

Thermal Properties

Thermal Conductivity @ 25 °C
Operating Temp from –50 to +190°C
Glass Transition Temp (Tg) 40°C
Thermal Expansion Coefficient, per °C
Heat Distortion, °C 175
Thermal Conductivity W/M-K 1.39
Thermal Conductivity BTU-IN/HR-FT²-°F 10.1

Tags: conductive epoxy, conductive adhesives, Silver epoxy, Silver epoxies, Silver adhesive, silver adhesives, Silver loaded, silver filled