Flexible Highly Conductive Pure Silver Epoxy Elecrically Conductive Adhesive 1 to 1 Mix Dispense

New Flexible Highly Conductive Pure Silver Epoxy Elecrically Conductive Adhesive 1 to 1 Mix Dispense
  • Views: 53487
  • Brand: ConductiveX
  • Product Code: Electro-Bond 17
  • Availability: In Stock
  • $0.00

Available Options

Electro-Bond 17 is a non-bleeding, electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require flexibility coupled with good electrical and mechanical properties. Electro-Bond 17 is a non-bleeding, electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require flexibility coupled with good electrical and mechanical properties. Electro-Bond 17 cures at room temperature and can be used as a flexible ""cold-solder"" for heat-sensitive components where hot-soldering is impractical. It also can be used for the assembly and repair of electrical modules, flexible circuits, membrane switches, wave guides, flat cable and high frequency shields.


Typical Properties

Components 2
Mix Ratio 100/100
Working Life @ 25°C 60 Minutes
Hardness, Shore D 63
Particle Size 44
Shelf Life 1 year
Cure Type Room Temp / Heat Cure
Cure Schedule 24 hours @ Room Temp 2 to 4 hours @ 60°C
Benefits
EMI & RFI shielding, in the assembly or repair of printed circuit boards, waveguides, electronic modules, flat cable, high frequency shields, connections, and circuitry.
Typical Applications
EMI & RFI shielding, in the assembly or repair of printed circuit boards, waveguides, electronic modules, flat cable, high frequency shields, connections, circuitry and as a cold solder for high-sensitive components where hot-soldering is impractical.

Physical Properties

Appearance Silver
Filler Silver
Viscosity Paste
Substrates aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, circuit board
Density @ 25°C
Compressive Strength, PSI 6500
Specific Gravity @ 25°C 2.46
Hardness 63
Lap Shear Strength 850
Reactive Solids Content, % 100
Shrinkage Linear, IN/IN 0.0016
Tensile Strength, PSI 1240

Electrical Properties

Volume Resistivity 1.00 E-03 ohm. cm
Dielectric Constant 4
Dielectric Strength 410

Thermal Properties

Thermal Conductivity @ 25 °C
Operating Temp from –50 to +140°C
Glass Transition Temp (Tg) 35
Thermal Expansion Coefficient, per °C 1.4
Heat Distortion, °C 170
Thermal Conductivity W/M-K 1.52
Thermal Conductivity BTU-IN/HR-FT²-°F 11

Tags: conductive epoxy, conductive adhesives, Silver epoxy, silver epoxies, silver adhesive, silver adhesives, flexible conductive silver, flexible conductive adhesive