Thermally Conductive Epoxy High Heat Resistance Adhesive up to 525F Aluminum Formulation Military GD
Click Image for Gallery
Thermo-Bond 14 is a very rigid, aluminum filled, epoxy resin system that offers optimum heat resistance with continuous operation to 475°F and intermittent to 525°F. Thermo-Bond 14 is designed for casting synthetic metal molds, dies, and tools. It is a liquid epoxy, aluminum alloy, polymer that can replace metal block tooling and machining at a fraction of the cost. Very low shrinkage ensures precise detail duplication for a wide variety of general polymer alloy tool applications
Typical Properties |
|
| Components | 2 |
| Mix Ratio | 100/10 |
| Working Life @ 25°C | 8 hours |
| Hardness, Shore D | 85 |
| Particle Size | 44 |
| Shelf Life | 2 year |
| Cure Type | Room Temp / Heat Cure |
| Cure Schedule | 24 hours @ Room Temp 2 to 4 hours @ 60°C |
| Benefits | |
| Casting synthetic metals molds, dies and tools. very low shrinkage . | |
| Typical Applications | |
| tooling, casting | |
Physical Properties |
|
| Appearance | Aluminum |
| Filler | Aluminum |
| Viscosity | 120000 |
| Substrates | aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, circuit board |
| Density @ 25°C | |
| Compressive Strength, PSI | 32000 |
| Specific Gravity @ 25°C | 2.11 |
| Hardness | 85 |
| Lap Shear Strength | 1650 |
| Reactive Solids Content, % | 100 |
| Shrinkage Linear, IN/IN | 0.0006 |
| Tensile Strength, PSI | 15000 |
Electrical Properties |
|
| Volume Resistivity | 5.00E+10 ohm. cm |
Thermal Properties |
|
| Thermal Conductivity @ 25 °C | |
| Operating Temp | from –50 to +205°C |
| Glass Transition Temp (Tg) | 125 |
| Thermal Expansion Coefficient, per °C | |
| Heat Distortion, °C | 125 |
| Thermal Conductivity W/M-K | 1.3 |
| Thermal Conductivity BTU-IN/HR-FT²-°F | 8.9 |
