Flexible Electrically Conductive Silver Epoxy, Thermally Conductive Adhesive Solder Replacement

Electro-Bond 16 is an electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require high flexibility coupled with good electrical and mechanical properties. elector Bond 16 is two-part, smooth paste adhesive of refined pure silver and epoxy resin components. It is free of solvents and copper or carbon additives. It develops strong, durable, resilient, electrically and thermally conducting bonds and coatings between many different and dissimilar materials such as metals, ceramics, glass and plastic insulates.

Typical Properties
Components	2
Mix Ratio	100/115
Working Life @ 25°C	90 Minutes
Particle Size	17
Shelf Life	1 year
Cure Type	Room Temp / Heat Cure
Typical Applications
EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connections, circuitry and as a cold solder for high-sensitive components where hot-soldering is impractical
Physical Properties
Appearance	Silver
Filler	Silver
Viscosity	Paste
Substrates	aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, circuit board
Density @ 25°C
Compressive Strength, PSI	4500
Specific Gravity @ 25°C	2.85
Hardness	64
Lap Shear Strength
Reactive Solids Content, %	100
Shrinkage Linear, IN/IN	0.003
Tensile Strength, PSI	3500
Electrical Properties
Volume Resistivity	1.00 E03 ohm. cm
Thermal Properties
Operating Temp	from –50 to +170°C
Glass Transition Temp (Tg)	30
Thermal Expansion Coefficient, per °C
Heat Distortion, °C	110
Thermal Conductivity W/M-K	1.49
Thermal Conductivity BTU-IN/HR-FT²-°F	10.3